Palm-based oleochemicals · Malaysia to the world
Stearic Acid Triple Pressed C18-65% Supplier in Malaysia
Build your next production run around the right raw material. Timur Oleochemicals supplies palm-based stearic acid 65% to manufacturers and chemical distributors worldwide. Request the offered grade’s technical documents, packing details and current bulk quotation.
For a useful offer, include your quantity, application, target specification and destination port.
The grade behind your formulation
What is Stearic Acid Triple Pressed C18-65%?
It is a commercial saturated fatty-acid grade with a defined C18 stearic-acid content and a balance consisting mainly of C16 palmitic acid. Timur’s product listing identifies C18-65 as a 65% minimum grade. The complete fatty-acid profile and approved test limits belong in the offered product’s technical data sheet and certificate of analysis.
Triple pressed stearic acid is selected for applications where fatty-acid composition, colour and processing behaviour matter. In suitable formulations, it can contribute structure and consistency or serve as a raw material for chemical derivatives. The right choice depends on your process and finished-product requirements.
Start with your approved specification, then compare the proposed supply against it. A familiar grade name is helpful; a matching TDS is much more useful. Your production line prefers facts to adjectives.
Technical qualification
Stearic Acid C18-65 specifications
Use these details to begin qualification. The current approved specification, SDS and lot-specific COA determine the identity and limits of the material supplied.
| Parameter | Product information | Confirm before purchase |
|---|---|---|
| Product / grade | Stearic Acid Triple Pressed C18-65% | Producer name and exact commercial grade code. |
| C18 content | 65% minimum, as listed by Timur | Contractual limit, analytical method and full fatty-acid distribution on the current TDS / COA. |
| Origin | Palm-based, vegetable origin | Applicable origin and animal-origin declarations. |
| Physical form | Beads or flakes, subject to the offer | Appearance, form and suitability for your handling equipment. |
| Acid & saponification values | Limits to be confirmed in mg KOH/g | Current approved limits and COA results. |
| Iodine value | Limit to be confirmed with stated units | Test method and maximum permitted value. |
| Titre, colour & moisture | Limits to be confirmed on the offered TDS | Titre in °C, colour scale / cell length, and moisture method. |
| Product identity | Use the exact offered SDS | CAS / EC identifiers and any destination-market requirements for the commercial mixture. |
| Packing | 25 kg bags commonly listed; final packing by quotation | Bag construction, pallets, net weights and container loading. |
| Price, MOQ & lead time | Current quotation required | Quantity, availability, delivery window, quotation validity and agreed trade terms. |
Commercial C18-65 is a fatty-acid mixture. Component identity, a similar product name or another supplier’s data should not replace qualification of the actual offered grade.
Match the ingredient to the job
Stearic acid applications for manufacturers
Different industries ask different questions. Use the application notes below as starting points for evaluating the offered grade, then establish compatibility and performance through your own trials.
01 / FORMULATION
Cosmetics & personal care
Suitable stearic-acid grades are evaluated for body, viscosity and co-emulsification in creams, lotions and shaving products. Ask for the ingredient identity, composition and quality documents required by your formulation team.
02 / CLEANSING
Soap & detergent manufacturing
Soap manufacturers assess stearic acid for bar hardness, structure and processing. Compare fatty-acid distribution, titre and colour with your recipe and production conditions before approving a replacement supply.
03 / INTERMEDIATES
Stearates & chemical derivatives
Fatty acids can be feedstocks for metallic stearates, esters and other derivatives. Industrial chemical buyers should set chain-distribution and analytical limits around the reaction and finished-product specification.
04 / PROCESSING
Rubber, plastics & coatings
Appropriate grades are considered for processing, lubrication, release and rubber-compounding functions. Confirm whether C18-65 or a dedicated rubber grade fits your process and benchmark.
05 / WAX SYSTEMS
Candles & industrial formulations
Candle and wax formulators may evaluate stearic acid for hardness and structure. Manufacturers of polishes, lubricants and related preparations should trial the proposed grade in their own system.
06 / DISTRIBUTION
Chemical distributors & importers
Qualify the material for the markets you serve. Request current documents, packing options and a shipment quotation, and specify your customers’ mandatory standards from the outset.
Food and pharmaceutical enquiries: Tell Timur the exact food or compendial standard and destination market you need. Suitability for these uses requires confirmation for the particular offered product. The C18-65 designation alone does not establish food, pharmaceutical or excipient approval.
Make the shortlist with evidence
Request TDS, SDS and COA for Stearic Acid 65%
A purchasing decision needs more than a product description. Ask for documents that identify the offered material and help your technical and procurement teams review the same supply.
TDS
Technical data sheet. Review grade identity, specified limits, physical form and applicable test methods.
Request current TDS →SDS
Safety data sheet. Check product identification and the handling, storage and safety information for the supplied grade.
Request current SDS →COA
Certificate of analysis. Request a recent example for screening and the applicable lot document for shipment approval.
Request applicable COA →If your purchase requires Halal, Kosher, RSPO or other quality and origin evidence, state it in the enquiry. Ask Timur to confirm current availability and the certificate scope, holder and validity that apply to the offered product.
For regulated applications, also identify the required manufacturing, traceability and destination-market documentation. Approve these requirements before placing the order.
From specification to shipment
Bulk packing, stearic acid price and export supply
Timur lists stearic acid C18-65 in 25 kg bags. Confirm the current packing format, bag material, pallet arrangement and net container load in your quotation. Loading depends on the offered product, container and shipping requirements.
For a current bulk stearic acid price from Malaysia, send the order quantity, destination port, preferred trade terms and required shipment window. Ask for the price basis, validity, MOQ, payment terms and availability to be stated together. That is a quotation your purchasing team can actually compare.
For export documentation, confirm the commercial invoice, packing list, certificate of origin where applicable, transport document and any paperwork needed at the destination. Follow the current SDS and supplier instructions for storage and handling.
Answers before the first enquiry
Stearic Acid Triple Pressed C18-65% FAQs
What does C18-65% mean?
C18 refers to stearic acid’s 18-carbon fatty-acid chain. Timur lists the grade as 65% minimum C18 content, with the balance mainly C16 fatty acid. Request the complete chain distribution, stated analytical basis and approved limits for the offered product.
Is stearic acid 65% the same as high-purity stearic acid?
C18-65 is a commercial fatty-acid mixture. Higher-C18 grades have different composition targets. Compare the full specification and your process requirements before selecting or substituting a grade.
Is Timur’s C18-65 stearic acid palm-based?
Timur supplies this product as palm-based, vegetable-origin material from Malaysia. Request the applicable origin declarations with your quotation if your quality system or customer requires documentary confirmation.
Can I buy stearic acid for cosmetics, personal care or soap?
These industries evaluate suitable stearic-acid grades for formulation structure and processing. Share your end use and required quality standard so the offered product can be reviewed for compatibility and application requirements.
Is this automatically a food or pharmaceutical grade?
No. Those uses require an explicitly qualified product and the appropriate supporting documents. State the exact food or compendial standard and destination market before purchase; C18 content alone does not establish suitability.
Which CAS number and ingredient name should I use?
Use the current SDS and identity documents for the actual offered material. A commercial C16–C18 fatty-acid mixture should be identified from its own documents, and cosmetic ingredient naming should be confirmed for the offered grade.
What are the packing options, minimum order and lead time?
25 kg bags are commonly listed. Confirm physical form, available packing, palletisation, minimum order, net container load and lead time in the current quotation. Share your destination and requested delivery window.
How do I request a current Stearic Acid 65% price?
Email your company details, required quantity, application, specification, destination port and preferred trade terms to info@timurnetwork.com. Include any mandatory documents so the technical and commercial requirements can be reviewed together.
Compare other stearic acid grades
If your specification calls for a different C18 profile, review the relevant product page and confirm the offered grade’s documents.
Timur Oleochemicals · Malaysia
Request your Stearic Acid Triple Pressed C18-65% quotation
Ready to qualify a supplier for your next order? Send your specification and shipment requirements. Ask Timur for the applicable documents, current availability and a formal export offer.
No. 26 Lorong Bayu Tinggi, 1B/KS6, Batu Unjur, 41200 Klang, Selangor, Malaysia.